Pitot static problems and the cure Cessna never told owners

A collection of technical articles & attached documents by Neal Wright
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
Locked
101
Posts: 49
Joined: Mon Jun 04, 2018 12:38 am
Name: Neal Wright
Aircraft Type:
Occupation-Interests:
Contact:

Pitot static problems and the cure Cessna never told owners

Post by 101 »

Originally Posted on Wed Sep 28, 2005 1:52 am

Cessna found that often the plane's instruments depending on static pressure would give more accurate indications if the static port (s) were ignored and the instruments removed from the static system and vented to cabin static.

They put out a letter to dealers (no owners allowed) which told the story above and after the noted serial number, only the airspeed indicator was hooked to a static port.

The reality is...sometimes, the airspeed works better hooked to cabin static, too.

The letter from Cessna is included in the article.

Neal
Attachments
cessna_pitot_static_open.pdf
The solution to many incorrectly-indicating instruments now connected to one of the two static ports.
(42.4 KiB) Downloaded 1642 times
Locked

Who is online

Users browsing this forum: No registered users and 8 guests