I got a little right seat DC3 Time today. It was only about fifteen minutes on the controls. But I will never forget it. I wasn’t expecting the seat time. I was allowed to sit in the jump seat for take off. Once he climbed out and turned West over a lake that is about 35 miles long, the copilot got up and pointed at his seat since I didn’t have a headset. He climbed out and I climbed in, buckled up and put on the headset. The pilot gave me the controls and I finished the climb out while following the winding lake. At the end of it, I did a slow turn 180 and followed the lake back to the airport and descended to pattern altitude where the pilot took it back and landed.
It was not nearly as heavy on the controls as I thought it would be, but I didn’t make any hard maneuvers. It felt like I was just hanging at the windscreen since there was no nose to see.
A great day!
DC3 Time!
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
8452
- Posts: 45
- Joined: Sat Apr 27, 2019 12:22 am
- Name: Larry B
- Location: NE Texas
- Aircraft Type: 1948 Cessna 140
- Occupation-Interests: Retired Automation Engineer, Nothing to do and all day to do it.
- Contact:
DC3 Time!
Larry Bible
Returned to the club after three years away due to life’s changes
1948 Cessna 140, O200A, Ragwing, Custom IFR Panel
1966 Mooney M20F/J
Returned to the club after three years away due to life’s changes
1948 Cessna 140, O200A, Ragwing, Custom IFR Panel
1966 Mooney M20F/J
-
6298
- Posts: 244
- Joined: Tue May 01, 2018 7:00 am
- Name: Randy Thompson
- Location: California
- Aircraft Type: Cessna 140
- Occupation-Interests: Work on airplanes and engines
- Contact:
Re: DC3 Time!
Very Impressive Larry!
Randy Thompson A&P IA Pilot
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals
-
6183
- Posts: 353
- Joined: Tue May 01, 2018 7:00 am
- Name: Mike Smith
- Location: Florida
- Aircraft Type: 140A (2) 1949 & 1950
- Occupation-Interests: Retired aerial power line patrol pilot for Gulf Power Co. CFIA, CFII, MEI
120-140 Assoc. Florida Rep. N9633A & N9688A - Contact:
Re: DC3 Time!
Know what you mean Larry. I got a similar opportunity when I lived in California and Sherman Smoot (Reno Race Pilot with Czech Mate Unlimited Racer) owned a Beech D-17 Staggerwing and handed me the controls. Nice airplane.
-
2066
- Posts: 600
- Joined: Tue May 01, 2018 7:00 am
- Name: Mac Forbes
- Location: North Carolina
- Aircraft Type: '46 Cessna 140
- Occupation-Interests: Retired - Current 120-140 Assoc. NC Rep.
- Contact:
Re: DC3 Time!
...could almost see my skin turning green with envy as I read your post, Larry! 