Pull Starter

Ask Questions and Offer Advice Related to the Cessna 120 & 140 Type
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
Post Reply
tomreneau
Posts: 74
Joined: Sat Jan 04, 2020 3:23 pm
Name: Tom Reneau
Location: KMAF
Aircraft Type: 1949 C140A
Occupation-Interests: Corporate Pilot
Contact:
Contact tomreneau

Pull Starter

Post by tomreneau »

Anyone have an extra pull starter cable with a knob and not a t handle sitting around?
Attachments
IMG_1468.jpeg
IMG_1468.jpeg (156.22 KiB) Viewed 465 times
IMG_1469.jpeg
IMG_1469.jpeg (162.54 KiB) Viewed 465 times
Top
chewie
Posts: 17
Joined: Tue Dec 24, 2019 2:03 pm
Name: Mark
Location: Hood River 4S2 / Dallesport KDLS
Aircraft Type: C140
Occupation-Interests:
Contact:
Contact chewie

Re: Pull Starter

Post by chewie »

Would an old mixture control work? I think I still have one in the hangar. Black knob similar to what you're showing. It was too short when I swapped out my carb.
Mark Johnson
Top
User avatar
6643
Posts: 2581
Joined: Tue May 01, 2018 7:00 am
Name: John C
Location: KLCI, NH
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:
Contact 6643

Re: Pull Starter

Post by 6643 »

You can buy a generic cable from Aircraft Spruce. If your casing is in good condition you can often just replace the core.
https://www.aircraftspruce.com/catalog/appages/a730.php
(Boy, have the prices gone up!)
End fitting:
https://www.aircraftspruce.com/catalog/ ... -16000.php
Top
Post Reply

Return to “Technical Discussion”