Page 1 of 1
Flap Control System - C140A
Posted: Mon Apr 19, 2021 5:00 pm
by romeo
Looking for any of the parts listed in the pictures (or engineering drawings) Open to any suggestions. I have spent hours surfing the web and suppliers with no luck. Thanks for your help.
Re: Flap Control System - C140A
Posted: Tue Apr 20, 2021 7:25 pm
by V529
Preferred airparts out of Kidron Ohio.
Airframe components by Williams out of Kendallville Indiana.
Salvage yards
Have you dug through old posts for sale in our Marketplace?
David Lowe out of Kentucky as a last resort.
Re: Flap Control System - C140A
Posted: Wed Apr 21, 2021 7:56 am
by romeo
Thanks, Victor, tried them all except for David Lowe.. no luck so far but I'll keep looking.
Re: Flap Control System - C140A
Posted: Wed Apr 21, 2021 1:56 pm
by 4004
Did you check with Yingling Aviation, Wichita to see if some of the parts are available ($$) from Cessna . Doubtful, but check with Cessna to see if drawings can be released. Keep an eye on and search recent past NTSB reports for crashes - follow any trails to possible salvage. Compare parts with early150 system. FWIW
R e: Flap Control System - C140A
Posted: Wed Apr 21, 2021 2:15 pm
by romeo
Yinglling found a spring I really didn't need but nothing else. I did find a list of C 140A crashes but am hesitating on contacting survivors as to where the remains are located, etc. I will be contacting CESSNA for drawings real soon. Thanks everyone for the suggestions.
Re: R e: Flap Control System - C140A
Posted: Sat Apr 24, 2021 6:26 am
by V529
romeo wrote: ↑Wed Apr 21, 2021 2:15 pm
Yinglling found a spring I really didn't need but nothing else. I did find a list of C 140A crashes but am hesitating on contacting survivors as to where the remains are located, etc. I will be contacting CESSNA for drawings real soon. Thanks everyone for the suggestions.
Send me a private message or get me your email address. I'll put you in touch with David. He may have those parts.