Would I need a STC to use pop rivets in leu of bucked rivets to install the rear and skylight windows?
Thanks!
Wayne
C-120
side and skylight windows
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
7915
- Posts: 1
- Joined: Tue May 01, 2018 7:00 am
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
-
6643
- Posts: 2444
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: side and skylight windows
Depends on what you mean by "pop rivets". You can use cherry max or cherry lock or any of the other locking rivets without any extra paperwork. To use hardware store pop rivets would require an stc, or at least a field approval. Imagine 60 or so tiny leaks in the roof...
The locking rivets are comparatively expensive and difficult to remove, so I'm not sure why you'd want to do that, unless it was to avoid needing a second hand to buck the rivets.
The locking rivets are comparatively expensive and difficult to remove, so I'm not sure why you'd want to do that, unless it was to avoid needing a second hand to buck the rivets.
John Cooper
www.skyportservices.net
www.skyportservices.net