Looking for C120 aileron bell crank bushings - Cessna part #0422161
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
riedener
- Posts: 14
- Joined: Sat Sep 25, 2021 11:43 am
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
Looking for C120 aileron bell crank bushings - Cessna part #0422161
I want to replace my C120 aileron bell crank bushings - Cessna part #0422161. The outer diameter is 3/8" (it fits inside a Torrington B310X bearing). The inner diameter fits an AN4-12A bolt (diameter .25). The closest thing I can find is from McMaster-Carr: Press-Fit Drill Bushing, 0.228" ID, 3/8" OD, 3/4" Long. The ID is too small. I wouldn't think this is such a rare parts. Any suggestions? Thanks, Chris
-
6643
- Posts: 2469
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Looking for C120 aileron bell crank bushings - Cessna part #0422161
Preferred Airparts have 4 in stock.
The bushings used in Torrington bearings like the B310X actually are the inner race and generally hardened and polished. Torrington have a selection, but not to big of a selection on length. Often they are too short.
The bushings used in Torrington bearings like the B310X actually are the inner race and generally hardened and polished. Torrington have a selection, but not to big of a selection on length. Often they are too short.
John Cooper
www.skyportservices.net
www.skyportservices.net