The Cessna 120-140 Association Forum

I want to replace my C120 aileron bell crank bushings - Cessna part #0422161. The outer diameter is 3/8" (it fits inside a Torrington B310X bearing). The inner diameter fits an AN4-12A bolt (diameter .25). The closest thing I can find is from McMaster-Carr: Press-Fit Drill Bushing, 0.228" ID, 3/8" OD, 3/4" Long. The ID is too small. I wouldn't think this is such a rare parts. Any suggestions? Thanks, Chris

Preferred Airparts have 4 in stock.

The bushings used in Torrington bearings like the B310X actually are the inner race and generally hardened and polished. Torrington have a selection, but not to big of a selection on length. Often they are too short.