Oil Temperature Adapter Nut
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
- Posts: 4
- Joined: Tue May 01, 2018 7:00 am
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
Oil Temperature Adapter Nut
WTB: Oil Temperature Adapter Nut for square flange Scott sensor. My Continental 90-14 has no adapter right now. I can't find a source for a new adapter. Does anyone have a used one they could part with? My sensor bulb has the old style flat/square style flange that requires a specific adapter.
- barrett5991
- Posts: 20
- Joined: Sat Apr 17, 2021 10:52 pm
- Name: Joe
- Location: Cedar City, UT
- Aircraft Type: 1947 Cessna 140
- Occupation-Interests:
- Contact:
Re: Oil Temperature Adapter Nut
I may have one for you. Will check my hangar to see what I can come up with.
-
- Posts: 143
- Joined: Tue May 01, 2018 7:00 am
- Name: Huey Pilot
- Location: Gainesville, TX
- Aircraft Type: 140
- Occupation-Interests: Retired
- Contact:
Re: Oil Temperature Adapter Nut
If Barrett doesn’t have one, Spruce or Univair May be of help.
- 6643
- Posts: 2443
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Oil Temperature Adapter Nut
There are at least 3 different nuts, and to the untrained eye, they are "the same". Unfortunately, you have to have the right one or you will ruin the sender.
I have the one I think you need, but I also still have the gauge that goes with it. The gauge leaks a little from being installed into the wrong nut at one point. If you really get stuck, let me know.
Meanwhile, read this article to ensure you have the right combination.
I have the one I think you need, but I also still have the gauge that goes with it. The gauge leaks a little from being installed into the wrong nut at one point. If you really get stuck, let me know.
Meanwhile, read this article to ensure you have the right combination.
John Cooper
www.skyportservices.net
www.skyportservices.net