WTB 140 Axle

For Buyers & Sellers: A Place to List Aircraft and Related Parts For Sale or Wanted to Buy
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
Post Reply
8305
Posts: 7
Joined: Mon Aug 27, 2018 9:25 pm
Name: Kendel M
Location: Tucson, Arizona
Aircraft Type: Cessna 140
Occupation-Interests: Aerospace Engineer, Autonomous Aircraft
Contact:

WTB 140 Axle

Post by 8305 »

I need a single 140 axle for my rebuild project, as one of them was stolen.
8281
Posts: 77
Joined: Sat Jul 28, 2018 3:54 pm
Name: John L
Aircraft Type:
Occupation-Interests:
Contact:

Re: WTB 140 Axle

Post by 8281 »

Hi,
I believe I have one. Will look and let U know today . Also check and let me know what size bolts hold the axle to the gear leg !

John
8305
Posts: 7
Joined: Mon Aug 27, 2018 9:25 pm
Name: Kendel M
Location: Tucson, Arizona
Aircraft Type: Cessna 140
Occupation-Interests: Aerospace Engineer, Autonomous Aircraft
Contact:

Re: WTB 140 Axle

Post by 8305 »

Thanks. All four bolts are the same (smaller) size on the 140. I have a pile of later Cessna axles, but they use two different bolt sizes and won't work here.
8281
Posts: 77
Joined: Sat Jul 28, 2018 3:54 pm
Name: John L
Aircraft Type:
Occupation-Interests:
Contact:

Re: WTB 140 Axle

Post by 8281 »

The axles that I have take AN5 Bolts ! ( 5/16 " )

John
User avatar
6643
Posts: 2443
Joined: Tue May 01, 2018 7:00 am
Name: John C
Location: KLCI, NH
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: WTB 140 Axle

Post by 6643 »

An AN5 bolt has roughly the same strength as a MS20004 bolt (NAS144). You can enlarge the bolt holes in the gear leg and use the AN5 bolts in place of the original setup. People do it all the time to install the sea plane axles. The axles are hard as all get out, though. An ordinary drill bit won't hold up very long.
Post Reply