FS: Wheel Extenders
Posted: Wed Jun 05, 2019 9:50 am
I removed the Wheel Extenders from my plane and Sand Blasted them.
No part number but HT is stamped in the middle on both.
The upper attachment holes are 5/16th and lowers are 3/8th. The bolt pattern fits Groves #2 Axle pattern.
I have zero documentation on them so use at your own risk.
$20 + Shipping from BC Canada. Willing to trade for a case of beer.
BurrowsDOTMarshallATgmailDOTcom
No part number but HT is stamped in the middle on both.
The upper attachment holes are 5/16th and lowers are 3/8th. The bolt pattern fits Groves #2 Axle pattern.
I have zero documentation on them so use at your own risk.
$20 + Shipping from BC Canada. Willing to trade for a case of beer.
BurrowsDOTMarshallATgmailDOTcom
- Extenders.JPG (199.59 KiB) Viewed 1730 times