Propellers
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
- Posts: 559
- Joined: Tue May 01, 2018 7:00 am
- Location: Michigan
- Name: Victor G
- Aircraft Type: C-120
- Occupation-Interests: Work on airplanes till the cows come home..........they're still out.
- Contact:
Re: Propellers
Good to hear you're enjoying your new "blade"!
- 5806
- Posts: 50
- Joined: Tue May 01, 2018 7:00 am
- Name: John von Linsowe
- Aircraft Type: 48 C-140
- Occupation-Interests:
- Contact:
Re: Propellers
5765 - What are you seeing for a static RPM with your new prop? Elevation and temperature also if possible.
John
- 5806
- Posts: 50
- Joined: Tue May 01, 2018 7:00 am
- Name: John von Linsowe
- Aircraft Type: 48 C-140
- Occupation-Interests:
- Contact:
Re: Propellers
Re-pitched the 7152 to 7150. Initial run shows only a 75 RPM increase in static RPM. Turns 2210 RPM static. It was warmer and more humid last night when I did a quick test of it so that may be a factor. More tests coming...
Greg L. - you noticed what I noticed on a new prop that they do not paint enough of the hub for a skull cap spinner. They leave the paint off where the mounting bolts seat but then go well beyond that. My prop shop says that Krylon flat black is a good match.
Greg L. - you noticed what I noticed on a new prop that they do not paint enough of the hub for a skull cap spinner. They leave the paint off where the mounting bolts seat but then go well beyond that. My prop shop says that Krylon flat black is a good match.
John
Who is online
Users browsing this forum: No registered users and 14 guests