My landing light motor drive is inoperable. The intermediate brass gear is broken & the pot metal armature end bracket is broken. I would appreciate feedback whether the motor drive can be repaired or replaced or is it more common to install leading edge lights instead? The wings are off of the plane to be recovered.
Thank you
Landing light C140
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
46cessna140
- Posts: 10
- Joined: Wed Jul 08, 2020 4:04 pm
- Name: David C
- Location: Owasso, OK
- Aircraft Type: C140
- Occupation-Interests:
- Contact:
-
6643
- Posts: 2444
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Landing light C140
If you want the funky classical look, I'd contact these guys: http://www.avliteaviation.com/vintage.html
OTOH, If you want to go with the leading edge light, now's the time to do it.
OTOH, If you want to go with the leading edge light, now's the time to do it.
John Cooper
www.skyportservices.net
www.skyportservices.net
-
6277
- Posts: 234
- Joined: Tue May 01, 2018 7:00 am
- Name: Ray Hunter
- Location: Ann Arbor, MI
- Aircraft Type: C-140
- Occupation-Interests: Retired AF, retired B-17 pilot for Michigan Flight Museum
- Contact:
Re: Landing light C140
Personally, I would go with the leading edge light, particularly since the wings are not covered. It's instant on, no drag, no mechanism to wear out, LED bulb will draw less power. You might get a few bucks for your old light on ebay?
-
2066
- Posts: 600
- Joined: Tue May 01, 2018 7:00 am
- Name: Mac Forbes
- Location: North Carolina
- Aircraft Type: '46 Cessna 140
- Occupation-Interests: Retired - Current 120-140 Assoc. NC Rep.
- Contact:
Re: Landing light C140
There's usually a boat load of Grimes lights and some parts on Ebay -- it's good to have part #s and/or photos handy to sift through them -- there were lots of models. That said, most seem priced so far out of reason that they never seem to sell, just relist 'til someone really needs/wants! 
. An example & one that's actually priced well @ $15.00 (...and, I realize that this isn't one of your broken parts):
The leading edge sure seems to be most practical all'round...but, I sure do like the "old timey" retractable on my 140 (...with a "modern" LED bulb). Hope it keeps on working!
Mac
. An example & one that's actually priced well @ $15.00 (...and, I realize that this isn't one of your broken parts): - grimes gear.jpg (158.73 KiB) Viewed 5525 times
Mac
-
46cessna140
- Posts: 10
- Joined: Wed Jul 08, 2020 4:04 pm
- Name: David C
- Location: Owasso, OK
- Aircraft Type: C140
- Occupation-Interests:
- Contact:
Re: Landing light C140
Thank you all for your feedback. Leading edge lights looks like the direction to go for me.
-
46cessna140
- Posts: 10
- Joined: Wed Jul 08, 2020 4:04 pm
- Name: David C
- Location: Owasso, OK
- Aircraft Type: C140
- Occupation-Interests:
- Contact:
Re: Landing light C140
Woodstock Aircraft in White Lake NY advised they only provide the paperwork for $195. Any feedback on where to purchase a leading edge landing light kit or how else to pursue installation would be appreciated. Thank you
-
tobyadobe
- Posts: 3
- Joined: Fri Mar 12, 2021 11:13 am
- Name:
- Location: E98
- Aircraft Type: C140
- Occupation-Interests:
- Contact:
Re: Landing light C140
Does anybody know how to get in touch with Woodstock Aircraft to obtain a copy of the STC for the leading edge landing light? I've phoned, sent e-mail, and even sent snail mail without success. Thanks.
-
4004
- Posts: 243
- Joined: Tue May 01, 2018 7:00 am
- Name: Edd
- Location: KFGU TN
- Aircraft Type: 140
- Occupation-Interests: Retired
- Contact:
Re: Landing light C140
Why not contact the FSDO for that area, IIRC the STC holders have to keep records for each one sold, STC holders hereon can clarify. Possible that the holder has "gone west", if so, and the STC is dormant, try to get a copy of the STC paperwork from someone hereon that has installed one and try for a field approval. 2c