My 1946 85 hp C120 needed a rebuild after the starter sent metal pieces into the crankcase. My mechanic sent everything off for rebuild, Cylinders, Case, Cam etc I have the rebuilt cylinders back but the shop where we sent the case tells us the case has been over-bored to the max and now we need a 20 oversize cam. He has been searching for one but no luck. If any member has one or knows where one is please let me know.
Thanks very much and Merry Christmas,
Dave Ramsey
dave@hattonbrown.com
334-301-3330 cell
WTB OS Cam shaft
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
dave ramsey
- Posts: 1
- Joined: Sat Dec 17, 2022 12:34 pm
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
-
6643
- Posts: 2444
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
-
6183
- Posts: 345
- Joined: Tue May 01, 2018 7:00 am
- Name: Mike Smith
- Location: Florida
- Aircraft Type: 140A (2) 1949 & 1950
- Occupation-Interests: Retired aerial power line patrol pilot for Gulf Power Co
120-140 Assoc. Florida Rep. N9633A & N9688A - Contact:
Re: WTB OS Cam shaft
Try contacting Randy Thompson at:
thompsonsair@tds.net
Randy rebuilds small bore Continental engines, and may have the camshaft you are looking for.
thompsonsair@tds.net
Randy rebuilds small bore Continental engines, and may have the camshaft you are looking for.
-
6597
- Posts: 374
- Joined: Tue May 01, 2018 7:00 am
- Name: David Sbur
- Location: Vancouver WA KVUO
- Aircraft Type: '46 140 0-200A
- Occupation-Interests: Agriculture
- Contact:
Re: WTB OS Cam shaft
Following this....
I am aware of ..020 undersize crankshafts with .020 oversize main bearings, but never heard of an oversize camshaft
I see the parts manual shows oversize cams, just never saw or heard of one. This oughta be a good education for me
I am aware of ..020 undersize crankshafts with .020 oversize main bearings, but never heard of an oversize camshaft
I see the parts manual shows oversize cams, just never saw or heard of one. This oughta be a good education for me
-
6298
- Posts: 244
- Joined: Tue May 01, 2018 7:00 am
- Name: Randy Thompson
- Location: California
- Aircraft Type: Cessna 140
- Occupation-Interests: Work on airplanes and engines
- Contact:
Re: WTB OS Cam shaft
I found that I have three .020 oversized camshafts for O-200’s. Still looking for a C-85 one.
Randy Thompson A&P IA Pilot
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals