Stuck oil ring C-85
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
cons
- Posts: 3
- Joined: Sun Jun 11, 2023 7:19 pm
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
Stuck oil ring C-85
I’ve been having issues with black sooty exhaust from #2 cylinders. Traced it to #2,top of piston wet and burnt oil in cylinder. We did a borescope and cross hatching is good. Question is can it be a stuck or cracked oil ring. We’ve flushed it out with Mike Busch method using Xylene,mineral spirits and Shell 100 oil recipe. Any answers?
-
6643
- Posts: 2444
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
-
8342
- Posts: 293
- Joined: Sun Oct 14, 2018 11:55 pm
- Name: Rick F
- Location: KUSE Wauseon OH
- Aircraft Type: C-140 (sold)
- Occupation-Interests: Captain B-777 (Retired)
- Contact:
Re: Stuck oil ring C-85
Can you get your borescope in a position to see the valves when they are open?
You need to look at the stems and seats.
It not easy but can be done.
Rick
You need to look at the stems and seats.
It not easy but can be done.
Rick
-
cons
- Posts: 3
- Joined: Sun Jun 11, 2023 7:19 pm
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
Re: Stuck oil ring C-85
Finally found issue- two stuck rings. Carbon.