Recently I have noticed the magnetic compass in my 46 C140 has been way off, it’s never been perfect but now it’s 50+ degrees off and inconsistent- can’t make a compass card for it. Also, it’s the worst when east and west; north and south are accurate.
Using another compass, it seems that the magnetic field is from the electric starter. I have the original starter on the C-85-12. Has anyone else experienced this? Is it possible that a winding in the starters armature broke and is causing excessive residual magnetism?
TIA!
Extreme compass deviation
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
- Posts: 5
- Joined: Tue Jul 20, 2021 11:56 pm
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
-
- Posts: 5
- Joined: Tue Jul 20, 2021 11:56 pm
- Name:
- Aircraft Type:
- Occupation-Interests:
- Contact:
Re: Extreme compass deviation
I’ll also add, switching the master switch on/off makes no difference
-
- Posts: 77
- Joined: Sat Jul 28, 2018 3:54 pm
- Name: John L
- Aircraft Type:
- Occupation-Interests:
- Contact:
Re: Extreme compass deviation
With everything electrical in the Off position , touch a screwdriver or some type of steel to the
Starter housing to see if it is Magnetized.
Or
Get a Boy scout compass and move it around to different parts to
see if the North Pole Needle points to the suspected item!
And if it is the Starter, have the Armature De-magnetized !
Starter housing to see if it is Magnetized.
Or
Get a Boy scout compass and move it around to different parts to
see if the North Pole Needle points to the suspected item!
And if it is the Starter, have the Armature De-magnetized !
-
- Posts: 77
- Joined: Sat Jul 28, 2018 3:54 pm
- Name: John L
- Aircraft Type:
- Occupation-Interests:
- Contact:
Re: Extreme compass deviation
My mistake / ! No need to use a compass. as it will point to steel anyway!
Just use the screwdriver method!
Just use the screwdriver method!
- 6643
- Posts: 2444
- Joined: Tue May 01, 2018 7:00 am
- Name: John C
- Location: KLCI, NH
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Extreme compass deviation
If the armature was magnetized, I don't think the starter would turn! The field poles, on the other hand, probably are. Also, if you have a generator, the field poles will be magnetized. But, then, they all are, so, everyone would have the same problem.
Have you tried to swing the compass and adjust the compensating magnets?
Take the compass out of the plane and see if it exhibits the same behavior.
Have you tried to swing the compass and adjust the compensating magnets?
Take the compass out of the plane and see if it exhibits the same behavior.
John Cooper
www.skyportservices.net
www.skyportservices.net