Just sharing my findings...
My 140 windshield has quite a bit of small scratches and a few deep ones. I tried some polish i got from my IA many years ago (Flitz???) but it didn't make much of a difference.
After doing some research on different aviation blogs I picked up Meguiar's Plastic Cleaner & Polish and tried it out earlier today.
The results seem promising but I will keep monitoring it in case it is just covering up the imperfections.
Here is before and after of one of the scratches in front of the pilot:
Scratched Plexiglass
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
- Posts: 28
- Joined: Fri May 22, 2020 8:28 pm
- Name: Rick F
- Location: 5M3
- Aircraft Type: C140
- Occupation-Interests: IT
- Contact:
Scratched Plexiglass
Rick
M20C/BC12D/140
M20C/BC12D/140
-
- Posts: 28
- Joined: Fri May 22, 2020 8:28 pm
- Name: Rick F
- Location: 5M3
- Aircraft Type: C140
- Occupation-Interests: IT
- Contact:
-
- Posts: 313
- Joined: Sat May 25, 2019 12:08 pm
- Name: Blaine F
- Location: Saskatchewan
- Aircraft Type: C140A
- Occupation-Interests: Helicopter Pilot
- Contact:
Re: Scratched Plexiglass
Thanks Rick, I have the same issue and was wondering what the best course of action would be. I will try the Meguiar's.
-
- Posts: 28
- Joined: Fri May 22, 2020 8:28 pm
- Name: Rick F
- Location: 5M3
- Aircraft Type: C140
- Occupation-Interests: IT
- Contact:
Re: Scratched Plexiglass
Blaine,
Here is the stuff I used: Yesterday I started working on the pilot's side window and realize that the cloudiness was partly due to paint overspray: Takes some time but eventually started to clear up. It's hard to see so I circled the area I worked so far: I am very happy this is working out otherwise I would have been asking advice on changing out the plexi
Here is the stuff I used: Yesterday I started working on the pilot's side window and realize that the cloudiness was partly due to paint overspray: Takes some time but eventually started to clear up. It's hard to see so I circled the area I worked so far: I am very happy this is working out otherwise I would have been asking advice on changing out the plexi
Rick
M20C/BC12D/140
M20C/BC12D/140
-
- Posts: 313
- Joined: Sat May 25, 2019 12:08 pm
- Name: Blaine F
- Location: Saskatchewan
- Aircraft Type: C140A
- Occupation-Interests: Helicopter Pilot
- Contact:
Re: Scratched Plexiglass
Thanks Rick, that will go on my long list