My original (!) winshield is showing its 70 years. Crazing at the lower center area. Since I have to do some paintwork after my also original cowl latches failed to perform their function, I thought I’d take care of the windshield.
Any recommendations? My mechanic is partial to LP from general use; I’ve seen that Cee Bailey is a regular advertiser with our community.
Experience? Recommendations? Advice?
Thanks!!
Windshield recommendation
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
-
- Posts: 11
- Joined: Tue May 01, 2018 7:00 am
- Location: KCMA
- Name: Greg L
- Aircraft Type: 1948 C140/C-90
- Occupation-Interests: retired
- Contact:
Windshield recommendation
1948 Cessna 140 N3693V
Serial Number 14969
Based at KCMA
Serial Number 14969
Based at KCMA
-
- Posts: 11
- Joined: Tue May 01, 2018 7:00 am
- Location: KCMA
- Name: Greg L
- Aircraft Type: 1948 C140/C-90
- Occupation-Interests: retired
- Contact:
Re: Windshield recommendation
Nobody has experience with replacement windshields?
1948 Cessna 140 N3693V
Serial Number 14969
Based at KCMA
Serial Number 14969
Based at KCMA
-
- Posts: 235
- Joined: Tue May 01, 2018 7:00 am
- Location: KFGU TN
- Name: Edd
- Aircraft Type: 140
- Occupation-Interests: Retired
- Contact:
Re: Windshield recommendation
You may want to consider shipping cost - last LP I ordered came UPS ok. LP is an old reliable company that I have known when I lived in Florida and they were "Luminated Plastics" in Ft Lauderdale IIRC, but changed to "LP" when they moved north - that was near 55 years ago. Others on this page have commented how pleased they were with CB - commenting about the excellent fit with minimum trimming .Give 'em a day or two and I feel sure gurus will comment. 2c
Big Edd
Big Edd
- 6643
- Posts: 2383
- Joined: Tue May 01, 2018 7:00 am
- Location: KLCI, NH
- Name: John C
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Windshield recommendation
Years ago I was an LP Aero dealer. I found their customer service exemplary. Never had an issue with anything of theirs I sold. That said, I never tried to install one of their windshields on a Cessna.
I've heard a lot of good things about Cee Bailey, especially re. fitment, but I've never done one of theirs, either.
The "new guy" on the block is Great Lakes Aero. They compete aggressively on price; I don't know anything about them other than that.
UPS rates have skyrocketed on large packages, so be sure to factor shipping costs into your decision.
I've heard a lot of good things about Cee Bailey, especially re. fitment, but I've never done one of theirs, either.
The "new guy" on the block is Great Lakes Aero. They compete aggressively on price; I don't know anything about them other than that.
UPS rates have skyrocketed on large packages, so be sure to factor shipping costs into your decision.
John Cooper
www.skyportservices.net
www.skyportservices.net
-
- Posts: 243
- Joined: Tue May 01, 2018 7:00 am
- Location: California
- Name: Randy Thompson
- Aircraft Type: Cessna 140
- Occupation-Interests: Work on airplanes and engines
- Contact:
Re: Windshield recommendation
I have put several LP aero’s. The had to be fit and trimmed a few times to fit well. I went to Cee Bailey because I liked the rounded look and the fit the first time. Shipping has gone crazy. The last one I bought I drove to get and the saved shipping paid for my fuel so I could visit my late friend before he passed.
Randy Thompson A&P IA Pilot
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals
-
- Posts: 11
- Joined: Tue May 01, 2018 7:00 am
- Location: KCMA
- Name: Greg L
- Aircraft Type: 1948 C140/C-90
- Occupation-Interests: retired
- Contact:
Re: Windshield recommendation
Thanks for the input, guys.
My airplane has the original windshield, which is "flat" across the face of it, with big bends at the "corners".
When I looked up prices, there is a huge difference. Plus the question of thickness. I can't see any reason to go thicker than OEM since sound reduction is not an issue...
What is the OEM thickness, anyway?!
My airplane has the original windshield, which is "flat" across the face of it, with big bends at the "corners".
When I looked up prices, there is a huge difference. Plus the question of thickness. I can't see any reason to go thicker than OEM since sound reduction is not an issue...
What is the OEM thickness, anyway?!
1948 Cessna 140 N3693V
Serial Number 14969
Based at KCMA
Serial Number 14969
Based at KCMA
- 6643
- Posts: 2383
- Joined: Tue May 01, 2018 7:00 am
- Location: KLCI, NH
- Name: John C
- Aircraft Type: 1946 C140/C90
- Occupation-Interests: A&P, semi-retired
- Contact:
Re: Windshield recommendation
I'm not certain, but I think it'a 1/8". Could be wrong, though...
John Cooper
www.skyportservices.net
www.skyportservices.net
-
- Posts: 11
- Joined: Tue May 01, 2018 7:00 am
- Location: KCMA
- Name: Greg L
- Aircraft Type: 1948 C140/C-90
- Occupation-Interests: retired
- Contact:
Re: Windshield recommendation
As a follow up...
The price differences are dramatic between suppliers and manufacturers...
I ended up ordering an LP clear windshield from Aircraft Spruce. $382 delivered to Southern California versus $570 from Univair. Cee Bailey much more expensive and not preferred by my mechanic, so the choice was easy!
Thanks for the feedback!!
Greg
The price differences are dramatic between suppliers and manufacturers...
I ended up ordering an LP clear windshield from Aircraft Spruce. $382 delivered to Southern California versus $570 from Univair. Cee Bailey much more expensive and not preferred by my mechanic, so the choice was easy!
Thanks for the feedback!!
Greg
1948 Cessna 140 N3693V
Serial Number 14969
Based at KCMA
Serial Number 14969
Based at KCMA
-
- Posts: 559
- Joined: Tue May 01, 2018 7:00 am
- Location: Michigan
- Name: Victor G
- Aircraft Type: C-120
- Occupation-Interests: Work on airplanes till the cows come home..........they're still out.
- Contact:
Re: Windshield recommendation
I see I'm late to the discussion. Your LP Aero plastics will be fine.
For me personally I have a Great Lakes windshield, I installed it new .....in the ....late 1990's. It's probably good for another "X" number of years yet.
That being said, since windows do last a long time, next windshield replacement, I will go with a Cee Baily. The thicker material, rounded front shape(lack of squared edges to distort your view), which lends itself to a stronger windshield, ease of install, etc, sold me on Cee Baily a long time ago.
On a square face windshield, (not a Cee Baily) If you ever want to scare yourself, put a "sticky' note pad page (single) in the center of your windshield and watch that dude flutter as you get above about 110mph. Yes, that's the center of your windshield moving in and out at the speed of a guitar string.
For me personally I have a Great Lakes windshield, I installed it new .....in the ....late 1990's. It's probably good for another "X" number of years yet.
That being said, since windows do last a long time, next windshield replacement, I will go with a Cee Baily. The thicker material, rounded front shape(lack of squared edges to distort your view), which lends itself to a stronger windshield, ease of install, etc, sold me on Cee Baily a long time ago.
On a square face windshield, (not a Cee Baily) If you ever want to scare yourself, put a "sticky' note pad page (single) in the center of your windshield and watch that dude flutter as you get above about 110mph. Yes, that's the center of your windshield moving in and out at the speed of a guitar string.
Who is online
Users browsing this forum: No registered users and 19 guests