2021 Convention

A Place to Share Experiences and Discuss Aviation Stories
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
a64pilot
Posts: 319
Joined: Sat Aug 29, 2020 8:41 pm
Name: Jody
Aircraft Type: C-140
Occupation-Interests: A&P former IA, Retired test pilot
Contact:

2021 Convention

Post by a64pilot »

I just noticed the Convention will be at KFFC, Falcon Field.
I’m sure all have noticed, but Falcon Field is within the 30 NM ring of ATL, and therefore unless I’m mistaken to attend you will have to be ADSB equipped.
V529
Posts: 590
Joined: Tue May 01, 2018 7:00 am
Name: Victor G
Location: Michigan
Aircraft Type: C-120
Occupation-Interests: Work on airplanes till the cows come home..........they're still out.
Contact:

Re: 2021 Convention

Post by V529 »

Hmmmm,

Good point. I'll check into that
8424
Posts: 217
Joined: Sun Mar 17, 2019 11:43 am
Name: Steve A H
Location: OK74
Aircraft Type: 1950 C140A
Occupation-Interests: Retired
Contact:

Re: 2021 Convention

Post by 8424 »

I came to the same conclusion when it was announced. I was hoping to be able to attend the next one, but I won't be able to by airplane. I try to avoid areas that need all that equipment like the plague! (or Covid!) I'm glad for all of you that have the equipment, it's just not for me.

Steve A H
V529
Posts: 590
Joined: Tue May 01, 2018 7:00 am
Name: Victor G
Location: Michigan
Aircraft Type: C-120
Occupation-Interests: Work on airplanes till the cows come home..........they're still out.
Contact:

Re: 2021 Convention

Post by V529 »

It is inside the 30 mile ring. So technically you need ADS-B out. I've contacted our host to see what "local flying conditions are"........in case there is some exemption.
User avatar
6643
Posts: 2438
Joined: Tue May 01, 2018 7:00 am
Name: John C
Location: KLCI, NH
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: 2021 Convention

Post by 6643 »

It might be possible to get a temporary exemption for an access corridor....
tonycondon
Posts: 84
Joined: Thu Oct 01, 2020 11:02 am
Name: Tony
Location: Wichita, KS
Aircraft Type: C-120
Occupation-Interests: Pilot, CFI, DPE
Contact:

Re: 2021 Convention

Post by tonycondon »

FAA ADAPT tool for ADSB exemptions: https://sapt.faa.gov/adapt-start.php

From what I saw, you must have a working Mode C transponder to get an exemption under ADAPT.

If you have an electrical system but now transponder...no exemption.

If you have a non-electric 120, you are exempt from the 30nm ring anyway.
N2395N
User avatar
8233
Posts: 276
Joined: Wed May 02, 2018 6:52 pm
Name: David Freeland
Location: Kansas City
Aircraft Type: 1946 C120
Occupation-Interests: Program Management
Contact:

Re: 2021 Convention

Post by 8233 »

You might be able to get a group of planes in via formation flight as long as the lead plane is properly equipped. Something to investigate.

https://www.aopa.org/news-and-media/all ... -ghXEpyU14
David Freeland - CFII
1972 Bellanca Super Viking and 1946 Cessna 120
2066
Posts: 600
Joined: Tue May 01, 2018 7:00 am
Name: Mac Forbes
Location: North Carolina
Aircraft Type: '46 Cessna 140
Occupation-Interests: Retired - Current 120-140 Assoc. NC Rep.
Contact:

Re: 2021 Convention

Post by 2066 »

8233 wrote: Mon Feb 08, 2021 8:47 am You might be able to get a group of planes in via formation flight as long as the lead plane is properly equipped. Something to investigate.

https://www.aopa.org/news-and-media/all ... -ghXEpyU14
That's worked well before and I understand that it's an "option" the convention committee has discussed and may suggest for those who may need. From 24 years flying in the Atlanta area airspace, I've found it extremely GA (and, VA!) friendly...almost to a genuine level of "we're from the FAA and we're here to help...really :D ". Mac
a64pilot
Posts: 319
Joined: Sat Aug 29, 2020 8:41 pm
Name: Jody
Aircraft Type: C-140
Occupation-Interests: A&P former IA, Retired test pilot
Contact:

Re: 2021 Conv

Post by a64pilot »

I lived and worked in Georgia for a number of years and was often at FFC, it’s where Aircraft Spruce is and also very close to the FAA ACO and FSDO.
it’s the one place I’ve been ramp checked.

It’s very easy to stay out of class B, the ceiling is quite high there, it’s only the 30 NM ring that gets you.

However it’s not somewhere you would want to try to sneak in , the FAA is there frequently.

I flew an S2R-T660 there to be test flown by the FAA test pilot for Certification, he lived near there and was coming back from flying the G-650 in Savannah in a rental 310, when he pre flighted it he noticed a cracked spinner bulkhead so he took the spinner off and came on.
Well an FSDO guy was there who proceeded to climb his behind for flying an aircraft with the spinner removed.
It was interesting to watch one branch of the FAA fight another branch

Lakeland is within the 30nm ring of Tampa I believe, and it’s been awhile since I have attended Sun-N-Fun, but I believe no radio and of course no mode C aircraft used to attend every year. So there is a way, maybe. I don’t know about this year’s Sun-N-Fun since the ADSB mandate is active

I’d try for a checkpoint due South, then proceed direct to FFC, minimize the time in the veil.
klyde sessna
Posts: 61
Joined: Mon Apr 13, 2020 12:19 pm
Name: Earl Tuggle
Location: Lebanon, Tennessee, USA
Aircraft Type: C120
Occupation-Interests: Retired. Airport bum.
Contact:

Re: 2021 Convention

Post by klyde sessna »

Sun N Fun 2021 is advertising no non-ADS-B equipted flights in or out unless your aircraft is ADS-B exempt. ADAPT waivers are encouraged.

With thousands of airports to choose from, maybe this Association needs to look elsewhere?
Last edited by klyde sessna on Tue Feb 09, 2021 12:11 pm, edited 1 time in total.
Post Reply