Sky-Tec vs B&C Starter

Ask Questions and Offer Advice Related to the Cessna 120 & 140 Type
Forum rules
You must be a member of the Cessna 120-140 Association in order to post new topics, reply to existing topics, or search for information on this forum. Use the "Join" link in the red menu bar.
User avatar
8230
Posts: 7
Joined: Wed May 02, 2018 6:10 pm
Name: Dale
Location: Miami
Aircraft Type: C-140
Occupation-Interests: Pilot
Contact:

Re: Sky-Tec vs B&C Starter

Post by 8230 »

We are looking to replace our pull-start O-200 starter with something better... It looks like B&C and SkyTec are the two choices, and both use a push button for start.

Are there any "Key" start conversions, or are they all push-button type? Anyone have any experience either way?

Our mechanic seemed to have a poor opinion of the push-button starter conversions but I think it's been awhile since he did a conversion :).
---
DC_Wolfe
wolfeairshows.com
User avatar
6643
Posts: 2471
Joined: Tue May 01, 2018 7:00 am
Name: John C
Location: KLCI, NH
Aircraft Type: 1946 C140/C90
Occupation-Interests: A&P, semi-retired
Contact:

Re: Sky-Tec vs B&C Starter

Post by 6643 »

Not sure why he'd feel that way. The only difference between push button and key start is the switch itself. Get yourself a $500 key start mag switch and keep him happy! (JK!)
6298
Posts: 247
Joined: Tue May 01, 2018 7:00 am
Name: Randy Thompson
Location: California
Aircraft Type: Cessna 140
Occupation-Interests: Work on airplanes and engines
Contact:

Re: Sky-Tec vs B&C Starter

Post by 6298 »

6643 wrote: Thu May 02, 2019 9:18 pm Not sure why he'd feel that way. The only difference between push button and key start is the switch itself. Get yourself a $500 key start mag switch and keep him happy! (JK!)
I agree!
Randy Thompson A&P IA Pilot
Hold STC SA547EA for installation of O-200 engine in Cessna 120/140 and 140A"s
Overhaul small Continentals
8452
Posts: 45
Joined: Sat Apr 27, 2019 12:22 am
Name: Larry B
Location: NE Texas
Aircraft Type: 1948 Cessna 140
Occupation-Interests: Retired Automation Engineer, Nothing to do and all day to do it.
Contact:

Re: Sky-Tec vs B&C Starter

Post by 8452 »

I just ordered a skytec for the fresh O200 that will be hung on the 140 in the next few weeks. I had no idea which was best so I just threw a dart at the board.

BTW, in a few weeks I will have an old starter in solid working condition for sale.
Larry Bible

Returned to the club after three years away due to life’s changes
1948 Cessna 140, O200A, Ragwing, Custom IFR Panel
1966 Mooney M20F/J
8452
Posts: 45
Joined: Sat Apr 27, 2019 12:22 am
Name: Larry B
Location: NE Texas
Aircraft Type: 1948 Cessna 140
Occupation-Interests: Retired Automation Engineer, Nothing to do and all day to do it.
Contact:

Re: Sky-Tec vs B&C Starter

Post by 8452 »

8230 wrote: Thu May 02, 2019 2:58 pm We are looking to replace our pull-start O-200 starter with something better... It looks like B&C and SkyTec are the two choices, and both use a push button for start.

Are there any "Key" start conversions, or are they all push-button type? Anyone have any experience either way?

Our mechanic seemed to have a poor opinion of the push-button starter conversions but I think it's been awhile since he did a conversion :).
The key mag switch in my Mooney provides this function. When turned all the way to the right you punch in for the starter. It is personal preference I suppose, but I really see zero advantage to that as compared to the push button replacement for the pull cable and it would be a much less expensive choice.
Larry Bible

Returned to the club after three years away due to life’s changes
1948 Cessna 140, O200A, Ragwing, Custom IFR Panel
1966 Mooney M20F/J
Post Reply